Archive for April, 2010

The Benefits Of An Access Control System

Posted in Uncategorized on April 30th, 2010 by admin – Be the first to comment

Access control to business premises, schools, nursing homes and other buildings is a serious issue in our society. For organisations like these, there is a need to control casual entry to a premises without impeding those going about their daily business. One answer is to install a keyless entry system or access control system.

An access control system is an electronic system which uses remote keys or tags to release door locks. The tag, which is carried or worn by a user, is presented in the vicinity of a reader located adjacent to a door and communicates with that reader using encoded radio waves. This eliminates the need for any contact. Once a tag is recognised by the reader, a signal is transmitted to release an electro magnet on the door lock.

Each tag has a unique number stored on an electronic chip encased in plastic. There is no power source (battery) within the tag. The reader is basically an antenna which is hard wired to a control unit. The reader on the door is powered from the mains supply and it emits radio waves via its antenna.

The tag also has an antenna which receives the radio waves from the reader. When the tag is within approximately 50mm (2″) of the transmitter, the power contained within the transmitted radio waves is sufficient to induce a small current in the chip contained in the tag. This current powers and operates the chip which is programmed to modify the received signal and send the modified encoded radio waves back to the control unit.

An access control system has the following benefits:

  • Contactless release of locking mechanism
  • One Tag opens all assigned doors allowing easy configuration of different access rights to groups or individuals
  • Allows simple access control of visitors, employees and the general public throughout a site
  • A simple operation removes access rights from a tag if an employee leaves with it or loses it
  • No numbers to remember
  • Simple to set up and change configuration as required
  • Low maintenance
  • Easy to expand access control system if requirements change
  • No multiple keys or numbers required
  • Vandal proof
  • Extremely fast lock release

When considering the purchase and installation of an access control system, it is important to use a professional installation company that is qualified to carry out the work.

What Does An Electrical Contractor Do?

Posted in Uncategorized on April 30th, 2010 by admin – Be the first to comment

When a new building development is being constructed, there will be many different people who will work on the project. An imperative part of the process is the electrical contractor. So what does an electrical contractor do?

An electrical contractor handles everything to do with the electricity in the building. Every appliance that is used, every light that is switched on, and absolutely everything else utilising electricity on the premises will be put in working order by the electrical contractor. The electrical contractor is on site before the foundations are even being built. The electrician needs to work with the blueprint of the building. They have to see the future plans for the structure so that they can determine where all the electrical wiring will be placed. Most electrical wiring will be put in the walls and the ceiling of the building. Once the electrician has determined where the wiring will be placed in the building, they then have to map out where the plug sockets, light switches and geysers will be placed.

The electrical contractor will fit in all the light fittings, the plug sockets and other power outlets. Depending on their speciality, they could do the wiring of the air condition and heating systems. Furthermore, they will connect the wiring for the intercoms, alarm systems and any other security wiring. There may be more than one electrical contracting company on site for the building of a new development. This is because certain electricians will only work with certain types of electrical wiring.

Once all the wiring has been put into place, the electrical contractor will usually test all the electrical outlets in the building. They will make sure there are no faults, and that there is no interference with the electrical wiring against other utilities in the building, such as the water system and so forth.

It is easy to see why electrical contractors are an integral part of the construction process.

 

Why I Picked a carbide tungsten rings design for my wedding band

Posted in Uncategorized on April 30th, 2010 by admin – Be the first to comment

So, why did I pick 8mm tungsten ring designs for my wedding band? Well, this is kind of a amusing tale that led us to considering men’s tungsten wedding bands from the outset.

Its necessary to always remember during this narrative that the_ Celtic tungsten ring is known for, among other things, being extremely sturdy & reasonably-priced.

One night almost a month ago my wife Judy and i were sitting in the_ garage talking when we got a call from our neighbor 2 doors to the_ east and he needed to ask if we had use of a metal detector. It turns out that the neighbor had just washed his hands and then gone outside to throw a ball to their dog. On the first throw his Tungsten Wedding Band flew off of his finger & into the_ backyard (and possibly over the_ fence).

Our son and daughter were down playing with their children when all this happened. Our daughter mentioned to the_ neighbor that grandma & grandpa got a metal detector. Amusing thing is it was true. My parents still had the_ old Radio Shack metal detector that my brother had when we were little. I told the_ neighbor what it was & that is was so old it most likely didn’t work anymore. Nope! Our little princess was swift to correct us in the background on the_ phone. Apparently, she & her brother had just been playing with it with grandpa the week before.

Fast forward a couple of days. We had the_ metal detector from my mother & father and let the_ neighbor go to town looking for it. He spent three hours in the_ heat & humidity of a hot August day in Missouri. Unfortunately, no such luck. I’m not sure he found anything metal in that backyard.

That prompted Judy and L to try and find out if Tungsten Bands would actually be detectable by a metal detector from the beginning. After searching & searching my wife and i never really found a solid answer to our question. (Please leave a comment to this article if you know the_ answer).

However, during our search i started looking at these cool looking Tungsten Rings. The more we looked for information on the metal detector question the more i started thinking what great looking rings they were. L just so happened that we had previously been discussing replacing our own gold wedding rings due to how poorly they had held up over the years.

We’ve learned a ton of info just about Tungsten Wedding Rings. Did you ask that the ideal ones aren’t just made of Tungsten? For the_ most sturdy Tungsten ring you really need to make sure its made of Tungsten Carbide. This alloy ensures extreme hardness – 8.5 -9 on the_ Mohs hardness scale (Diamonds are a 10). It also makes these rings extremely resistant to scratching.

This incredible durability makes Tungsten rings especially suited for every day wear & tear. Whether you working in the office or out in the_ garage rebuilding an engine you’d be hard pressed to mess these rings up. They’ll hold their shine and luster for nearly forever.

One of the questions that kept coming up as i did research was related to the_ potential for these rings to be cut off in an emergency. It turns out that all hospitals and emergency crews have the tools necessary to cut or even break off a Tungsten ring. Sure, they are very hard but these professionals have the know how. One site even gave pretty detailed instructions on how you could use an everyday pair of vice-grip pliers to actually break off the_ ring yourself at home. It sounded plausible. However, I’d like to see it done in real life.

All in all it seems like Tungsten Bands fit the bill for durable, masculine, highly polished replacement for our old bands. They would also make a great choice for someone getting their first wedding bands. They definitely sound like they would last a lifetime.

Oh, you’re in all probability still wondering what happened to the neighbor’s Tungsten Ring, right? Well, unfortunately L have mixed news. The_ bad news is he hasn’t found it yet. The good news is he had a guarantee on the ring that was like car insurance; it provided a replacement for a smal deductible which is a much better deal than buying a new ring.

L told him “you know, the_ ideal way to find the_ ring you lost is to go ahead & spend the $ to get a new one.” Wouldn’t it be crazy if the lost ring showed up in the yard the_ next day.

Leash Training Your Cat

Posted in Uncategorized on April 30th, 2010 by admin – Be the first to comment

You can train your cat to walk on a leash with a lot of patience and a few simple rules. A harness is best for a cat. Cat’s won’t respond well to jerking their collar so a harness is really best and should be loose and comfortable for the cat. First, allow your cat to play with the new items so she gets used to them. Try putting the harness on her and see how she reacts.

 This step is very important, if you force the cat to wear the harness, they are not going to be happy at all with the harness or with you. Take your time with all the steps. If your cat balks at any step, go back to the previous one. It is a lot harder getting a cat to cooperate than it is for a dog. After the cat is wearing the harness loose, then it is the time to tighten the harness up until it is the right fit for the cat. At this point, you will want to give the cat time to wear the harness. Next attach the leash.

Then you will want to start walking the cat inside, until the cat is doing well. Once the cat is comfortable with the leash then it is time to go outside for a walk. When walking with the cat make sure there is not too much loose leash or they will be running in all random directions.

There are many distractions for a cat outdoors – birds, squirrels and the neighbor’s pets might cause your cat to want to run around, but you must keep a tight leash so that your cat walks with you and is not dragging you all over the place. You will soon be enjoying your outings.

Check out my site at: Tiny Bird Cages

Creating a Raised Bed

Posted in Uncategorized on April 30th, 2010 by admin – Be the first to comment

If your current planting goals involve plants that require good water drainage, I am sure you know how frustrating it is to have a garden that just will not cooperate. Some plants can handle the excess water that comes about from being in an area that does not drain properly. In fact, it might just cause them to bloom more lushly. However, other plants do not cope as well, and it will cause them to die a gruesome, bloated death. You should always find out about the drainage required for every plant you buy, and make sure that it will not conflict with any of the areas you are considering planting it in.

In order to test how much water your designated patch of soil will retain, dig a hole approximately ten inches deep. Fill it with water, and come back in a day when all the water had disappeared. Fill it back up again. If the 2nd hole full of water is not gone in 10 hours, your soil has a low saturation point. This means that when water soaks into it, it will stick around for a long time before dissipating. This is unacceptable for almost any plant, and you are going to have to do something to remedy it if you want your plants to survive.

The usual method for improving drainage in your garden is to create a raised bed. This involves creating a border for a small bed, and adding enough soil and compost to it to raise it above the rest of the yard by at least 5 inches. You will be amazed at how much your water drainage will be improved by this small modification. If you are planning to build a raised bed, your prospective area is either on grass or on dirt. For each of these situations, you should build it slightly differently.

If you want to start a raised garden in a non grassy area, you will not have much trouble. Just find some sort of border to retain the dirt you will be adding. I have found that there is nothing that works quite as well as a few two by fours. After you have created the wall, you must put in the proper amount soil and steer manure. Depending on how long you plan to wait before planting, you will want to adjust the ratio to allow for any deteriorating that may occur.

If you are trying to install a raised bed where sod already exists, you will have a slightly more difficult time. You will need to cut the sod around the perimeter of the garden, and flip it over. This may sound simple, but you will need something with a very sharp edge to slice the edges of the sod and get under it. Once you have turned it all upside down, it is best to add a layer of straw to discourage the grass from growing back up. After the layer of straw, simply add all the soil and steer manure that a normal garden would need.

Planting your plants in your new area should not pose much difficulty. It is essentially the same process as your usual planting session. Just be sure that the roots do not extent too far into the original ground level. The whole point of creating the raised bed is to keep the roots out of the soil which saturates easily. Having long roots that extend that far completely destroys the point.

Once you have plants in your new bed, you will notice an almost immediate improvement. The added soil facilitates better root development. At the same time, evaporation is prevented and decomposition is discouraged. All of these things added together makes for an ideal environment for almost any plant to grow in. So do not be intimidated by the thought of adjusting the very topography of your yard. It is a simple process as I am sure you have realized, and the long term results are worth every bit of work.

Not chosing any cell phone insurance

Posted in Uncategorized on April 29th, 2010 by admin – Be the first to comment

I went through the worst ordeal this past week with my cell phone isurance claim. I will leave my cell phone provider anonymous because I found that most, if not all cellular companies, use the same insurance company anyway. So there’s really no need to specify- your cell phone insurance company may very well be the same as mine. I will also leave anonymous the make of the phone I lost because that will give away the provider too, but I will tell you that it was one of the most expensive smart phones out there ( hence the need for insurance). Get a load of what happened folks….

http://mybabysfirstbirthday.com/

After being directed by my cellular service provider to file the claim on-line I attempted to answer some identity questions that were so far off I couldn’t believe it. I was being asked about people and place I’ve never known or been to. I was denied my first on-line claim attempt so I called to have a human walk me through the process. Because they claimed they couldn’t properly identify me I was denied again and told that a claims specialist would be contacting me through e-mail or a secondary number I provided, within twenty-four hours. Five days later and still no one has got in touch with me.

http://mybabysfirstbirthday.com/purchase-first-birthday-products-and-services/

This morning I gave the insurance company a fairly emotionally charged follow-up call. To my surprise the first thing the representative told me was that we would be able to have everything squared away by the end of the call. I wondered how, being that before-hand I needed to resolve everything with one of their “claims specialists”. Sure enough, within about seven minutes they figured out who I was and I could get a new phone for that discounted price. The representative assured me that her company was not in the business of taking peoples money or making customers work extra hard to get a service they already pay for. My final words to her? “Sure lady….”.

http://mybabysfirstbirthday.com/contact-page/

New Cleaning Process

Posted in Uncategorized on April 27th, 2010 by admin – Be the first to comment

I would like to have a moment in order to inform you of some information about myself and my dedication to the industry of carpet cleaning. I’m Rich Moore and I’m the owner of PowerPro Carpet Cleaning New Jersey. I’ve been maintaining carpets and rugs as well as upholstery for over Twenty years. I have owned 7 carpet cleaning franchises, I’ve sub contracted for department stores, I’ve sub contracted for a variety of large carpet cleaning firms. I’ve been called to aid as a Specialist in the field by numerous major corporations. I’ve cleaned more than 2 million square ft of carpet, I have owned my own carpet cleaning company and also have professionally cleaned more than 2810 homes and offices. I’m Forty one years old and I’m married for 19 years to my beautiful wife Pam. We have Two children: Daniel age 13, Edward age Twelve.

I have tried very , very hard to utilize the conventional practices associated with the current carpet cleaning , In past times I’ve cleaned carpets and upholstery with steam cleaning, Chem-Dry carpet cleaning, Host carpet cleaning, shampoo carpet cleaning, Capture carpet cleaning, , Post carpet cleaning, Hot water extraction some of these processes you may heard about.

All these procedures will give you results to some extent but additionally while doing so involve some issues making several consumers unhappy. A few of the issues which i have experienced in past times were : carpet was very wet, carpet smells for the period of drying out, carpet wet for 24 or 2 days, left over dirty water in customers toilet, need to get Dozens and dozens of gallons of water from customers bathtub, Carpets get dirty faster after the carpet have been cleaned coming from left over residue, The Padding gets soaked and moldy smells arrive in basements, a powerful smell associated with chemicals, chemicals possibly not harmless for infants along with pets, The Chemical Clean process can leave harmful chemicals in carpeting, Carpet shrinking, carpet buckling, and carpet damage.

We’ve asked many other carpet cleaners if they share this specific headache and what they do in conditions like this and I truly did not like the answers that i received from various other cleaning experts. The answer that many other cleaners offered me was “This is the reason we have got insurance coverage”, or even “what can we do?” I thought to myself What can we do? That’s why we’ve got insurance? In Other words that is definitely the customers problem. This did not sit right to me. My clients are essential to me. We need a much better method!

It took some time but I discovered a improved way, my older and brand new clients really enjoy this particular brand-new procedure for cleaning carpet. Precisely why? I will itemize just a few reasons here, –1. Carpets are cleaned with a 100% an all natural cleaning chemical (so safe I have the ability to drink it) — 2. Carpet cleaned as well as dried in merely Three hours –3. Carpets and rugs appear to be brand-new again –4. stained area’s will be eliminated –5. Traffic area’s can be like new and pile has been raised as well as restored –6. A+Allergy Cleaning method. –7. Superb improvement on dated and newer generation carpets and rugs as well as safe for Stainmaster as-well as Scotch-Guarded Carpets and rugs –8. The Bottom line is carpets look and feel and smell new when using the safest cleaning method on earth!

I have have a great deal of good results, I’ve worked incredibly hard to find and also perfect this particular carpet cleaning procedure that not just gets the carpet cleaner then any other process but it employs ingredients coming from Mother Nature. A truly win win situation for everybody for everyone.

My personal Promise to You: If you are unhappy by any means with my carpet cleaning, we’ll clean it again Free . If you are still not thoroughly 100% Pleased And Happy, We (you as well as I together) will seek the services of a different carpet cleaning company and if perhaps they’re able to do something that i wasn’t qualified to accomplish, then I will Not only Return Your hard earned money, I will also pay for the other carpet cleaning service. You will not be charged. Not merely one cent. Just what exactly could possibly be more fair than this?

Call PowerPRO Carpet Cleaning

1-800-CLEAN-MY CARPETS

1-800-253-2669

Lincrete Specialised Precast Concrete Culvert and Pipe System

Posted in Uncategorized on April 26th, 2010 by admin – Be the first to comment

Lincrete Culverts provide traditional and specialised precast concrete culvert solutions for use in numerous civil construction and architectural applications.

Lincrete Culverts maintain a pool of resources and expertise to meet some of the most arduous culvert situations, whether main highway or remote road locations. Providing effective precast Culvert solutions for a huge array of civil projects. Lincrete Concrete Culverts speciality precast concrete culvert solutions are ideal for use in various civil construction and architectural The extra selling point of the lincrete precast culvert system is that the speciality precast culvert pieces allow for rapid deployment into the roadway system. This can even mean that a 2 lane road can be installed in a day, whilst maintaining the roadway open to one lane of traffic all the time

Lincrete Culverts have the resources and expertise to meet the most demanding culvert situations, providing effective precast solutions for a wide range of municipal projects in an array of locations. Our precast concrete products include precast concrete culverts, precast concrete bases, and precast concrete wing walls and precast culvert planks

With Lincrete Culverts theres no replacement regarding expertise. Weve been in the business for over 30 years and developed solutions for an array of road and environmental situations. We bring this experience to every project, having it done on time, to specification and also on budget.

Our manufacturing companies enable us to work in pretty much any weather, 6 days a week, utilising efficient precast concrete manufacturing methods, coupled with proven design technology, efficient materials handling systems, and quality assurance practices. The benefits of our precast concrete culvert system are passed on to our customers via guaranteed delivery and shorter construction times.

A culvert construction could be designed in a huge variety of ways, depending on size and where it is actually installed, the form on the culvert is straight, bent, angled or tapered, with precast culvert side walls, and precast concrete cap panels to cover large areas.

We Will be only too pleased to quote for the manufacture of the speciality Precast Concrete culvert system.

A Useful Introduction to Potty Training Your Baby

Posted in Uncategorized on April 26th, 2010 by admin – Be the first to comment

At some point, everybody has to face the fact that the time is right to potty train your toddler. Prior to beginning, it is advantageous to get the details initially. The first thing you should be aware of is definitely that for the most part small children really are not prepared to potty train before they are eighteen months to 36 months old. Not surprisingly, each individual youngster is different and several could start far sooner or later on than this specific timeline. It’s reported by parents that boys are notoriously more difficult to potty train in comparison with daughters, and they in most cases learn later instead of sooner.

By simply being familiar with basic potty training advice for your child, you are able to breathe a lot easier in the event your little one is battling with potty training. Lots of parents have been in the circumstance of hearing a different mom brag about how easily her little one picked up on how to potty train. Don’t permit it to bring you down, at some point every child will potty train. As a wise doctor one time said, they are not going to leave for college wearing baby diapers. So be certain that you aren’t pressuring yourself or your little one to potty train prematurily ..

You’ll find various types of potty training publications, CDs and Videos that can present you with instruction while commencing, this particular many times enormous undertaking. Determining which one you ought to pay attention to can be difficult? It can be a far better plan to question your pediatrician what exactly he or she advises. Typically these experts can present you information and numerous hints when it is time to begin. Not only did they receive a medical degree, they have dealt with the concern of potty training kids many times, possibly even in their own personal life. Nearly all medical professionals will inform you not to be anxious if your child is tardy on the potty training plan.

Potty training your children shouldn’t need to stress you out. The first thing you should do when your toddler is older than eighteen months is search for clues of their preparedness to make use of the toilet. It might include things like indicating annoyance with unclean diapers and an curiosity in utilizing a potty seat. You might manage to encourage the child into wanting to potty train by offering them new underwear, which often might be a very good natural incentive. Even the most difficult of little ones will sooner or later become potty trained, and if any challenges happen in the course of the process for example bowel problems because of holding using the bathroom properly your doctor is there to aid every step of the way. A number of, but definitely not all, small children will ‘hold it’ in an effort to prevent using the potty or soiling their training pants, but their doctor can help stop this practice.

perfecthair.lesdemocrates.fr

Swimwear Over The Ages

Posted in Uncategorized on April 25th, 2010 by admin – Be the first to comment

Introduction

Swimwear is the term used for garments designated for swimming and beach wear. It has gradually developed over the years from the bulky garments used to completely cover the body into the selection of brief pieces of fabric arranged to expose as much as possible of the body.

Finding the right sort of swimwear is not always that easy particularly if you do not have a large budget. There is an enormous variety of body sizes and shapes for both men and women and correspondingly there are an enormous variety of outfits ranging from the very cheap to the very expensive.

Fashion Dictates

If it was just a case of having a bathing costume to wear when going swimming and replacing it when it had worn out, life would be relatively easy. But there is the matter of fashion. Every year the designers come up with a different style so that the previous year’s model suddenly looks old fashioned and we feel compelled to buy a new one. As purchasers we are confronted with one piece swimsuits, two piece swimwear, some with long tops, some with skimpy tops, high leg cut, high waist cut, different cup sizes, in a variety of fabrics, colours, patterns, two tone and so on. The choice is endless.

History of Swimwear

The earliest recorded bathing costume was in 350 BC in Greece which was a toga-like garment for bathing. During the 18th century people visited spa resorts for their health where they spent time in the spa waters. Naturally they needed something proper to wear, other than their day clothes, when they were engaged in public bathing. Later the recreation of beach bathing demanded a specially made outfit to maintain decorum and decency, so the bathing suit was developed.

Initially the swimwear was rather like ordinary daywear, and the dresses worn by the women sometimes had lead weights sewn into the hems to prevent the skirts from floating up. As the expansion of the railways enabled the masses to spend time at the seaside a more practical type of outfit was required. By the early 1900’s the swimsuit consisted of bloomers with black stocking and shoes, and the top was like a jacket belted at the waist. Swimming was considered suitable for men, while women were assisted into the water for a short dip.

Over the century attitudes changed and swimming became an Olympic sport for both men and women. Gradually the swimming costume changed to adopt short capped sleeves and more ankle was exposed beneath the bloomers. As women became more active in the water the swimming costume needed to be less cumbersome so the neckline was lowered and the tops became sleeveless. Eventually the Princess cut was introduced which consisted of the trousers attached to a blouse in one piece.

In 1909 Annette Kellerman, the Australian swimmer, movie starlet and writer, went down in history as being the very first woman to ever dress in a one piece swimsuit and the very first person to get imprisoned for indecency whilst dressed in women’s swimwear! In spite of this, by 1910 “Annette Kellermans” had become the new approved womens swimsuits.

From then on the swimsuits became lighter and briefer. By the 1920’s the women wore figure hugging tank suits made from wool Jersey and by 1928 they had evolved into the swimsuit we would recognise today. In the 1930’s cotton was introduced for bathing suits sometimes with little overskirts to hide bulky thighs, but film stars wore fashionable figure hugging costumes with higher cut legs sealing the fate of the fashionable swimwear.

The corset manufacturers in the 1940’s saw that women with less than perfect figures needed swimsuits to hide or control the bulges, so seeing a gap in the market they produced costumes which had control panels for the tummy and bra cups and bones to give support to the bust. Using the practice applied in corset making they introduced the stretch factor to bathing costumes so that they were more flattering than ever before.

With the development of new fabrics, Nylon and Lycra became the fabric of choice for swimwear because of their stretch properties. This meant that the costume could be pulled on without openings or fastenings and gave a firmer cleaner line to the figure. Women continued to wear all in one swimsuits until the 1950’s when the bikini became popular.

Leisure Swimming or Sunbathing

Although certain costumes are called swimwear, in fact some never get near the water. They are solely for sunbathing which usually means they are as small as possible, just barely covering the essential bits so that the skin gets maximum exposure to the sun and such a design would be classed as a bikini.

Two Piece or Bikinis

Over two thousand years ago early mosaics and pottery from Greece depict what in fact looks like an early version of a bikini. These garments were used by women performers and acrobats and were in two pieces to cover the breasts and the lower part of the body, much like the current style of Bandeau tops. Modern day runners and athletes wear something very similar when competing. Paula Radcliffe when running the Marathon last year, wore a garment almost identical to those worn thousands of years ago!!

The bikini resembles women’s underwear and has been described as a scanty two piece bathing suit. The lower part may be two small triangles attached together with a string tie at either side, or even a thong. The upper part may also be two small triangles attached together with a string tie but arranged in a slightly different order. Louis Reard patented the contemporary version of the bikini in 1946; his design was similar to the skimpy string 1970’s bikini and it shocked the world when it appeared on French beaches in 1947.

The very first bikini shown in the cinema was in the Bond film Dr No when Ursula Andress rises out of the sea in a white bikini. This created the iconic Bond girl and made her world famous. When being interviewed on television recently she revealed that the bikini had been constructed out of a bra covered with the fabric to give her the required lift of the bosom. This actual bikini sold at auction for £35,000 in 2001.

Ultimately the top part of the bikini was abandoned altogether when topless sunbathing became the norm in some countries and the bottom was just a G-string or thong also called a Tanga. Oliver Saillard the fashion journalist states that the bikini is the most popular female beachwear in the world, and that the emancipation of swimwear is linked to the emancipation of women.

In the 1950’s there was a popular song entitled ‘In My little Itsy Bitsy Yellow Polka Dot Bikini’ that indicated the acceptance of the new style of swimwear. I remember my cousin persuading me to try on a bikini and I felt very exposed but she said how fantastic I looked in it because I was so slim.

Although the bikini is now an acceptable garment whatever the size, the one piece swimsuit is still the best for serious swimmers. Some businesses are well known for their skill at making swimwear and make all the garments for the Olympic team and other swimming competitions. Now swimwear is available in a wide range of bust sizes and the more expensive makes have control panels for the stomach combined with clever styling to create a good silhouette. Combined with a matching sarong, older ladies may feel more comfortable when walking around the beach area.

Helen Mirren was photographed on holiday in her substantial bikini last summer with the caption commenting on how good she looked for her age and that particular bikini was snapped up from the stores within days. Perhaps the purchasers believed that they could look as good as Helen Mirren in a bikini if they had the same one.

Leg Line

Some two piece bathing suits are cut so that the waist is high and the corresponding leg line is also cut high. I believe the aim is to make the wearer look as though her legs are much longer than they are. However if you have less than the perfect shape for this style it can emphasise large hips so it’s not for all women.

Another fashion trend is the tankini where the bottoms look like little shorts and shows the lower curve of the bottom, which is fine if you are young with a nice pert bottom.

Modern styles ofdesigner white bikini appear to be reversing the trend of earlier decades of revealing as much bare skin as possible, with the tankini which features a longer top that dares to tease by exposing a slim strip of bare midriff.

The classic bikini style is still as popular as ever though, with the cut of the leg line following the natural crease between the leg and the hip.

The most recent development in fabric is the ‘tan through’ swimwear. This allows the body to tan without exposing the body to the world. Some commentators on this style point to the effects of too much sun on the body and the prevalence of skin cancer of which the evidence indicates an alarming increase. However, the counter argument to that is if you are wearing a bikini anyway then the extra exposure to the sun through the top and bottom garments is hardly going to make much difference.

Conclusion

Swimwear is a term used these days to cover all types of beach wear and swimming gear. It is a bit of a misnomer in that many outfits never see the water and are not used for swimming. However there is a huge range of garments available for the purchaser of different styles, sizes and fabrics. The one commonality of course is that everyone wants to look good once they don these garments. The main key to that is to make sure your new swimwear is the right fit and cut, for your body size and shape.

The importance of being properly measured for your swimwear is often overlooked but it is as important as being properly measured for your bra or other underwear, particularly if you do indeed intend to actually swim in your new swimwear! By wearing the right size and style swimwear for your body, will ensure you are really comfortable in it on the beach, in the pool or wherever else you choose to wear it.